GNAT UK

Blog

From the field.

Fleet updates and short notes from the GNAT UK team. For project case studies see Case Studies; for method and technique writing see Insights.

Abrasive cold cutting on a COMAH-regulated industrial siteIndustry

6 May 2026 · Nick Turnbull

COMAH Projects: Bigger Jobs, Bigger Challenge

COMAH-regulated work brings its own set of constraints. Why specialist demolition matters when the site is hazardous, the access is restricted, and the safety regime is tight.

Read →

Confined-access robotic demolition in a restricted industrial environmentIndustry

28 April 2026 · Nick Turnbull

Wherever, Whatever — Taking On the Difficult Projects

A note on why Gnat UK takes on the hardest projects — the ones other contractors decline. Method-led delivery in the toughest environments.

Read →

Brokk 800 robotic demolition machine in heavy operationFleet

21 April 2026 · Nick Turnbull

When Only the Best Is Acceptable

Some projects can't accept the second-best option on cost, availability, or support. When the brief leaves no margin for compromise, this is what we bring.

Read →

GNAT UK robotic plant on a riverside water-industry dock — selective demolition and removal works on an asset being brought back into service, water management hose running into the channel alongsideIndustry

21 April 2026 · Nick Turnbull

Ready for the AMP8 Infrastructure Wave

The UK's mothballed sites and water assets need bringing back into service. Why specialist demolition is upstream of the AMP8 capital programme — and what readiness looks like.

Read →

Brokk and Husqvarna robotic demolition fleet being loaded for site workFleet

14 April 2026 · Nick Turnbull

Monday Loading — Brokks and Husqvarnas Heading Out

It's Monday. The Brokks and Husqvarna systems are getting loaded up for another week contracting on client sites across Great Britain and Ireland.

Read →

Aquajet hydrodemolition robot working on a UK highway bridge deckIndustry

27 March 2026 · Nick Turnbull

Highways to Hell — Or Heaven, With Gnat UK

Thirty years of remote demolition across the highways and infrastructure sector. Robotic demolition, diamond cutting, hydrodemolition, cold cutting — under one roof, one method-led team.

Read →

NALTA remote hydrodemolition rig stripping deteriorated concrete from reinforced rebar, the rebar emerging clean and bond-ready — selective concrete removal at its highest precisionMethod

22 March 2026 · Nick Turnbull

A Masterpiece in Hydrodemolition

Not a Mona Lisa — but a masterpiece in hydrodemolition. When remote demolition is the preferred method, here's what good looks like.

Read →

Brokk 500 robotic demolition unit loaded onto a transport ready for siteFleet

1 August 2024 · Nick Turnbull

Brokk 500 Heads to London for an Extended Demolition Project

One of our BROKK 500 units, fully loaded and ready to start a long work assignment in London — 40% more demolition power than its predecessor, the BROKK 400.

Read →

GNAT UK team at the Institute of Demolition Engineers Seminar at Leeds ArmouriesIndustry

26 February 2023 · Nick Turnbull

Institute of Demolition Engineers Seminar at Leeds Armouries

Catching up with colleagues and clients at the Institute of Demolition Engineers Seminar at Leeds Armouries.

Read →

An iconic British industrial heritage landmark, photographed before demolitionIndustry

23 November 2022 · Nick Turnbull

A Sad Farewell to an Iconic Industrial Heritage Landmark

A reflection on the loss of an iconic British steel-industry landmark — and a hope for what new technology and renewal can build on these sites.

Read →

Brokk 800 Diesel demolition robot breaking deep reinforced concrete foundations during a factory refurbishmentFleet

27 July 2022 · Nick Turnbull

Brokk 800 Diesel Tackles Reinforced Foundations Off-Grid

When 3-phase power isn't available, the 11-tonne Brokk 800 Diesel with 10m reach and MB 1200 breaker delivers unmatched off-grid demolition power.

Read →

Got a scheme to discuss?

Tell us what you're dealing with — restricted access, live operations or sensitive structure. We'll define the right method and machine.