So.... There ARE times when it’s OK to Sit Down on the Job! GNAT UK were recently asked to undertake Tunnel Benching Deconstruction Work in a 1.5 m. Diameter Main Sewage Pipe System! Owing to the Limited Access and extremely tight working space issues on this project, this procedure had previously been tackled using conventional hand-held breakers. A time consuming, physically taxing activity, carrying with it, the commensurate risk of HAV. Gnat's preferred - and Safer - sol

This large scale project illustrates how complimentary demolition procedures working together in harmony can achieve great results - in record time. Our Hydrodemolition and Diamond Sawing Teams worked in tandem to cut, isolate, remove and refurbish a series of formidable concrete plinths situated in the well of a large North East Car Factory. Hilti Diamond Wire Saws were deployed to isolate and remove redundant concrete pillars and pillar sections. The isolated concrete plint

High-Reach Demolition in Confined Spaces - Our niche speciality! Our equipment is purpose built for selective demolition in confined spaces and has been adapted over many years to tackle increasingly complex deconstruction projects Small Robot - High Reach! The basement areas within this large scale factory refurbishment project had very restricted access issues which precluded the use of our larger machines. To overcome this, we deployed one of our Husqvarna DXR 140’s - a sm

Our Aquajet ERGO Hydrodemolition Systems are ideally suited for demanding refractory demolition work within environments too confined to accommodate standard tracked Hydrodemolition Robots. We routinely deploy our ERGO Systems in Refractory environments such as Kilns and Boiler Furnaces. The photos here show the System rigged to Remove Castable Refractory inside a Bio-Mass Boiler Furnace. Light, flexible and manoeuvrable, the ERGO system is Operated Remotely - it mounts onto

A number of Technical and Operational issues had to be addressed during this refurbishment project on a major UK Reservoir Extreme Hydrodemolition! This technically challenging Project centred on a 60 Million Cubic Metre Capacity Reservoir. The task required the selective removal of bulk sections of defective concrete from the roof, sides and floor of its steeply inclined Overflow Sluice. Gnat Demolition UK, working closely with the main contractor, devised a new method to sa